# Scaler 2 causing system crash **URL:** \ **Category:** Scaler 2 Support\ **Created:** [July 10, 2022, 8:43am UTC](https://forum.scalermusic.com/t/scaler-2-causing-system-crash/11034 "2022-07-10T08:43:15Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![yorkeman](https://avatars.discourse-cdn.com/v4/letter/y/edb3f5/32.png) [@yorkeman](https://forum.scalermusic.com/u/yorkeman)\ **Post date:** [July 11, 2022, 10:43pm UTC](https://forum.scalermusic.com/t/scaler-2-causing-system-crash/11034/6 "2022-07-11T22:43:06Z")
> [@Blackstoat](#): > > Can someone please advise me what’s going on??? Long shot, but please search the board for ‘OpenGL’, and check the similar sounding reports - may help. > [@Scaler crashing Logic](https://forum.scalermusic.com/t/scaler-crashing-logic/5770/7): > > Hi @chrissm sorry to hear about the ongoing issue. You could try to disable the OpenGL rendering and see if it improves: You can disable OpenGLRendering from the ScalerSettings application. MacOS: Press CMD+Space to open the Spotlight Search and type “ ScalerSettings ” Go to the Help page and click “Turn OFF OpenGL”: Also, would you mind sending me the crash log next time it happens? [ed@tonicbits.com](mailto:ed@tonicbits.com) Thanks, Ed > [@Abelton 11 Instant crash](https://forum.scalermusic.com/t/abelton-11-instant-crash/10604/2): > > It seems that it is a graphics problem, something that has already been consulted on other occasions. He left here one of the possible solutions that he gave in his day Ed1. Luck [Ed1](https://forum.scalermusic.com/u/Ed1)[Team](https://forum.scalermusic.com/g/Team) wrote: the fact that the screen stays black points to a graphic issue, either a missing GPU driver or an incompatible OpenGL version. You can disable OpenGL Rendering from the ScalerSettings application: Press the Windows key to open the search and type “ ScalerSettings ” Go to the Help page and click “… > [@Logic Pro crash and Alchemy tuning issue](https://forum.scalermusic.com/t/logic-pro-crash-and-alchemy-tuning-issue/10042/2): > > Are you running Logic under Rosetta? If not, try that. Try turning off OpenGL — Press CMD+Space to open the Spotlight Search and type “ ScalerSettings ” Go to the Help page and click “Turn OFF OpenGL”: Could you take a screen shot of this before and after. Are you using DAW sync? If you are hearing hissing it sounds like you might not be registered. Click on the Logo in the upper left and the click on registration to see if it shows it is registered. You say it’s not usable anymore. Was i… and others … --- _[View the full topic](https://forum.scalermusic.com/t/scaler-2-causing-system-crash/11034)._