# Scalar 2 incompatible message in Logic Pro 10.7.2

**URL:** <https://forum.scalermusic.com/t/scalar-2-incompatible-message-in-logic-pro-10-7-2/9437>\
**Category:** Scaler 2 Support\
**Created:** [February 16, 2022, 9:52pm UTC](https://forum.scalermusic.com/t/scalar-2-incompatible-message-in-logic-pro-10-7-2/9437 "2022-02-16T21:52:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![puzzlemuzzle](https://avatars.discourse-cdn.com/v4/letter/p/87869e/32.png) [@puzzlemuzzle](https://forum.scalermusic.com/u/puzzlemuzzle)\
**Post date:** [February 16, 2022, 9:52pm UTC](https://forum.scalermusic.com/t/scalar-2-incompatible-message-in-logic-pro-10-7-2/9437/1 "2022-02-16T21:52:28Z")

</div>

I tried installing and also rerunning the plug in manager which says crashed validation.  
Mac is 11.5.2 Big Sur M1  
Any ideas what to do next?  
Thanks

---

<div class="post-metadata">

**Author:** ![davide](https://yyz2.discourse-cdn.com/flex012/user_avatar/forum.scalermusic.com/davide/32/824_2.png) [@davide](https://forum.scalermusic.com/u/davide)\
**Post date:** [February 18, 2022, 5:14am UTC](https://forum.scalermusic.com/t/scalar-2-incompatible-message-in-logic-pro-10-7-2/9437/2 "2022-02-18T05:14:53Z")

</div>

Welcome @puzzlemuzzle Hard reset your Mac, open a new DAW project (I presume you are in Logic), open plugin manager selects Scaler 2 and reset and rescan selection.  
That should do it.

---

<div class="post-metadata">

**Author:** ![puzzlemuzzle](https://avatars.discourse-cdn.com/v4/letter/p/87869e/32.png) [@puzzlemuzzle](https://forum.scalermusic.com/u/puzzlemuzzle)\
**Post date:** [February 21, 2022, 7:08pm UTC](https://forum.scalermusic.com/t/scalar-2-incompatible-message-in-logic-pro-10-7-2/9437/3 "2022-02-21T19:08:47Z")

</div>

Hey @davide thank you for the response. That did the trick. Take care