# Jammed Midi Notes/Continuous Ringing of Chords for On-board Sounds (2.1) **URL:** \ **Category:** Scaler 2 General Discussion\ **Created:** [September 14, 2020, 11:16pm UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958 "2020-09-14T23:16:53Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![MusicalGym](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@MusicalGym](https://forum.scalermusic.com/u/MusicalGym)\ **Post date:** [September 14, 2020, 11:16pm UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/1 "2020-09-14T23:16:53Z")
I’m editing chords and playing back patterns using Scaler 2.1 sounds and they don’t stop sounding unless I click midi panic after each chord pass. This is happening when clicking the chord button and also just playing back the progression. Soft piano, felt piano, celestial used in testing. ---
**Author:** ![jamieh](https://yyz2.discourse-cdn.com/flex012/user_avatar/forum.scalermusic.com/jamieh/32/1139_2.png) [@jamieh](https://forum.scalermusic.com/u/jamieh)\ **Post date:** [September 14, 2020, 11:39pm UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/2 "2020-09-14T23:39:44Z")
Sounds like you have a midi feedback loop happening. How is it set up? What OS/DAW? ---
**Author:** ![MusicStudent](https://avatars.discourse-cdn.com/v4/letter/m/f04885/32.png) [@MusicStudent](https://forum.scalermusic.com/u/MusicStudent)\ **Post date:** [September 15, 2020, 1:32am UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/3 "2020-09-15T01:32:39Z")
I am afraid this is new with version 2.1. I had never see this with Scaler until the update. It is not workflow stopping, to have to hit the Midi Panic, and it is not frequent, but it is new for me here on Reaper Win10. ---
**Author:** ![Maximumraver](https://avatars.discourse-cdn.com/v4/letter/m/46a35a/32.png) [@Maximumraver](https://forum.scalermusic.com/u/Maximumraver)\ **Post date:** [September 15, 2020, 3:32am UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/4 "2020-09-15T03:32:53Z")
I have this too on just playing a midi via Scaler (since 2.1), it messes with the ability to detect chords, as the stuck notes are added to the next chord, I can work around it by pressing play and then stop for each chord, but it does slow down my workflow. This (as far as I am aware) did not happen with the previous version. ---
**Author:** ![MusicalGym](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@MusicalGym](https://forum.scalermusic.com/u/MusicalGym)\ **Post date:** [September 15, 2020, 3:35am UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/5 "2020-09-15T03:35:31Z")
Windows 10 Home Latest Studio One 4 before 5 release, 64 bit Today, it was happening all the time, not occasionally. ---
**Author:** ![ClaudioPorcellana](https://yyz2.discourse-cdn.com/flex012/user_avatar/forum.scalermusic.com/claudioporcellana/32/14242_2.png) [@ClaudioPorcellana](https://forum.scalermusic.com/u/ClaudioPorcellana)\ **Post date:** [September 15, 2020, 10:28am UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/6 "2020-09-15T10:28:47Z")
I don’t know if it’s the same issue, but yesterday I noticed for the first time that while fiddling with a pattern (in the lowest part of the GUI) my bass line (not armed clearly) suddenly started to play some note here and there during the chord progressin (i.e. only with some chord, not all) I deselected the bass line (in Ableton Live 9) and the issues disappeared ---
**Author:** ![MusicalGym](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@MusicalGym](https://forum.scalermusic.com/u/MusicalGym)\ **Post date:** [September 16, 2020, 6:44pm UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/7 "2020-09-16T18:44:15Z")
Today the issue seems to be gone so far; however, I can no longer bind any of the sections. All I want to do is bind section A in order to have trigger keys, but nothing gets bound. Maybe I’m missing something very basic, but I’ve never had this issue. Edit: Unloading and reloading Scaler fixed the binding issue. Edit 2: Fixing the binding issue appears to have reintroduced the jammed midi notes issue. Edit 3: Jammed midi notes is now gone; back to normal for now at least. No idea what “fixed” it. ---
**Author:** ![davide](https://yyz2.discourse-cdn.com/flex012/user_avatar/forum.scalermusic.com/davide/32/824_2.png) [@davide](https://forum.scalermusic.com/u/davide)\ **Post date:** [September 16, 2020, 11:03pm UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/8 "2020-09-16T23:03:13Z")
Yeah there is a random bind gets stuck issue I have come across a few times. We are aware internally. ---
**Author:** ![tacman7](https://avatars.discourse-cdn.com/v4/letter/t/c57346/32.png) [@tacman7](https://forum.scalermusic.com/u/tacman7)\ **Post date:** [September 17, 2020, 9:08pm UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/9 "2020-09-17T21:08:25Z")
I was having a problem where the notes of the synth I was controlling were all running together like the sustain pedal was depressed. So I put in low values in a sustain pedal lane and that made it sound normal. ---
**Author:** ![Maximumraver](https://avatars.discourse-cdn.com/v4/letter/m/46a35a/32.png) [@Maximumraver](https://forum.scalermusic.com/u/Maximumraver)\ **Post date:** [September 18, 2020, 12:23pm UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/10 "2020-09-18T12:23:54Z")
Thanks for the info 🙂 ---
**Author:** ![nobadmojo](https://avatars.discourse-cdn.com/v4/letter/n/eb8c5e/32.png) [@nobadmojo](https://forum.scalermusic.com/u/nobadmojo)\ **Post date:** [September 21, 2020, 8:11pm UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/11 "2020-09-21T20:11:58Z")
I;m having the same or very similar issues. It’s persistent. Win10 Pro latest update. Studio One v5 w. Scaler 2.1. Wasnt happening at all in v 2.0. Is a fix in the works and anything to be done in the mean time??. In my case the notes and chords ring out, but there is also a loud annoying loud ‘hum’ in the background…dont know if it is stuck chord, multiple stuck notes or what, but i have to always hit the Midi kill…doesnt matter what preset i use, ---
**Author:** ![MusicalGym](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@MusicalGym](https://forum.scalermusic.com/u/MusicalGym)\ **Post date:** [September 21, 2020, 9:09pm UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/12 "2020-09-21T21:09:13Z")
Try unloading and reloading Scaler (if you haven’t done so). It might fix the problem, at least for awhile. ---
**Author:** ![nobadmojo](https://avatars.discourse-cdn.com/v4/letter/n/eb8c5e/32.png) [@nobadmojo](https://forum.scalermusic.com/u/nobadmojo)\ **Post date:** [September 21, 2020, 11:44pm UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/13 "2020-09-21T23:44:31Z")
sure…tried that. also reloaded Daw, rebooted computer etc. the problem quickly recurs and persists ---
**Author:** ![nobadmojo](https://avatars.discourse-cdn.com/v4/letter/n/eb8c5e/32.png) [@nobadmojo](https://forum.scalermusic.com/u/nobadmojo)\ **Post date:** [September 22, 2020, 2:42am UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/14 "2020-09-22T02:42:35Z")
Mine is a Scaler 2.1 issue with my keyboard. It’s a native a49 that works perfectly fine with everything but Scaler. It worked fine in 2.0 but not in 2.1 Every note i play on this keyboard is a stuck note …100% of the time w. this keyboard. Scaler plays fine if i use the mouse to play notes and also my Atom pad is fine. This is disappointing. Do I need to start a ticket? ---
**Author:** ![davide](https://yyz2.discourse-cdn.com/flex012/user_avatar/forum.scalermusic.com/davide/32/824_2.png) [@davide](https://forum.scalermusic.com/u/davide)\ **Post date:** [September 25, 2020, 8:58pm UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/15 "2020-09-25T20:58:33Z")
Update and see If that solves the problem for you. Shouldn’t be happening and something pertinent to your setup [Scaler 2 Latest Version / Updates](https://forum.scalermusic.com/t/scaler-2-latest-version-updates/3542) ---
**Author:** ![nobadmojo](https://avatars.discourse-cdn.com/v4/letter/n/eb8c5e/32.png) [@nobadmojo](https://forum.scalermusic.com/u/nobadmojo)\ **Post date:** [September 26, 2020, 3:44am UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/16 "2020-09-26T03:44:14Z")
sure thanks tried that before. no go. they acknowledge an issue and are troubleshooting. must be something specific to my keyboard which works fine with all my other stuff. ---
**Author:** ![Maximumraver](https://avatars.discourse-cdn.com/v4/letter/m/46a35a/32.png) [@Maximumraver](https://forum.scalermusic.com/u/Maximumraver)\ **Post date:** [September 26, 2020, 9:36am UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/17 "2020-09-26T09:36:24Z")
I installed 2.1.1, and I have a very strange issue, it is hard to describe but it has some sort of effect on the mouse clicks in my DAW (FL Studio), it took me a bit to figure out it was Scaler that was causing it, unloading the plugin(s) from the project fixes the problem. For example, normally when you click on an audio clip in the playlist, the clip window is focused (like opening a folder in windows), but if Scaler 2.1.1 is loaded anywhere in the project, it breaks that function. It also prevents me from opening folders in a sample based plugin, it’s like the mouse is locked to trying to drag the folders or something, dragging individual samples does work, but doubleclick does not, I temporarily reverted to 2.1 as I’m working on a project at the moment, but I’ll do some more testing when that’s done, I’ll make a new and detailed thread by then. ---
**Author:** ![ruekin](https://avatars.discourse-cdn.com/v4/letter/r/dec6dc/32.png) [@ruekin](https://forum.scalermusic.com/u/ruekin)\ **Post date:** [November 12, 2020, 7:55am UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/18 "2020-11-12T07:55:21Z")
I have the same problem as OP. I’m using Ableton Live 10.1.25 on a mac. In version 2.12 notes get constantly stuck even when not using a keyboard and just playing back within the plugin itself or triggering chords with the mouse. So I am not sure it has anything to do with any midi keyboard. This doesn’t happen with version 2.09 so I actually went back to that version and missing out on the new features. Any ideas what could fix it? ---
**Author:** ![MusicalGym](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@MusicalGym](https://forum.scalermusic.com/u/MusicalGym)\ **Post date:** [November 12, 2020, 10:05am UTC](https://forum.scalermusic.com/t/jammed-midi-notes-continuous-ringing-of-chords-for-on-board-sounds-2-1/4958/19 "2020-11-12T10:05:14Z")
This happened again just the other day after downloading a Blues xml session from this forum and importing using on-board sounds.