# Does Scaler 3 let you set the key of the scale you're searching for?

**URL:** <https://forum.scalermusic.com/t/does-scaler-3-let-you-set-the-key-of-the-scale-youre-searching-for/18842>\
**Category:** Scaler 3 General Discussion\
**Created:** [February 5, 2025, 11:10pm UTC](https://forum.scalermusic.com/t/does-scaler-3-let-you-set-the-key-of-the-scale-youre-searching-for/18842 "2025-02-05T23:10:49Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![machinesworking](https://avatars.discourse-cdn.com/v4/letter/m/a88e57/32.png) [@machinesworking](https://forum.scalermusic.com/u/machinesworking)\
**Post date:** [February 5, 2025, 11:10pm UTC](https://forum.scalermusic.com/t/does-scaler-3-let-you-set-the-key-of-the-scale-youre-searching-for/18842/1 "2025-02-05T23:10:49Z")

</div>

I have Scaler 2 and my main use for it is identifying odd scales I come up with for a main part in a song, then exploring the chords it comes up with based on that scale and key. The thing that is somewhat annoying in Scaler 2 is _although I may not know the scale I’m using, I always know the key._ With Scaler 2 it just spits out a couple dozen possible scales in any key, with no way to specify the key or sort by key, so you search through dozens of scales looking for the key the phrase is in.

I’m really hoping that this isn’t the case in Scaler 3, my main reason for Scaler is identifying weird scales I come up with, and I always have to include all possible scales meaning the list gets big, but not being able to specify key or at the least sort by key, slows this all down. Thanks in advance for any replies.

---

<div class="post-metadata">

**Author:** ![ed66](https://yyz2.discourse-cdn.com/flex012/user_avatar/forum.scalermusic.com/ed66/32/5339_2.png) [@ed66](https://forum.scalermusic.com/u/ed66)\
**Post date:** [February 6, 2025, 12:45pm UTC](https://forum.scalermusic.com/t/does-scaler-3-let-you-set-the-key-of-the-scale-youre-searching-for/18842/2 "2025-02-06T12:45:18Z")

</div>

Hi @machinesworking

Welcome to the forum. Just to clarify when you say

> [@machinesworking](#):
>
> _I always know the key._ With Scaler 2 it just spits out a couple dozen possible scales in any key, wi

do you mean that you know the tonic and the key signature, or are you using the detect function to find the scale?

In Scaler 2 if you know the tonic you can select it from the MAIN page by clicking on the SCALES button

 ![Find_A_Scale_1](https://canada1.discourse-cdn.com/flex012/uploads/scalermusic/original/2X/e/e11ba6132817111eed450771d247f455e61bdca8.jpeg)

You can now select the tonic from the drop down menu

 ![Find_A_Scale_2](https://canada1.discourse-cdn.com/flex012/uploads/scalermusic/original/2X/4/49963e3bae7000c47c6777d6eacd511aea0814eb.jpeg)

to show all the scales for that tonic

 ![Find_A_Scale_3](https://canada1.discourse-cdn.com/flex012/uploads/scalermusic/original/2X/f/f583dfc0d14f646c169d96683df15fb599ae7c55.jpeg)

If you click on teh ALL TYPES button

 ![Find_A_Scale_4](https://canada1.discourse-cdn.com/flex012/uploads/scalermusic/original/2X/9/90510c539fed44b3043c46432f524ba981e2f2a1.jpeg)

you will get a drop down of the scales sorted by type from which you can select your scale.

 ![Find_A_Scale_5](https://canada1.discourse-cdn.com/flex012/uploads/scalermusic/original/2X/1/1a395d283bdeaf0fba406a9882b92d347f84fbcf.jpeg)

However, if you are using the detect function to find the scale of a part of a song this will not work. Scaler will show all the possible scales that will fit the song starting with the closest fit. At present this list cannot be filtered.

Hope this helps explain what is happening.

---

<div class="post-metadata">

**Author:** ![machinesworking](https://avatars.discourse-cdn.com/v4/letter/m/a88e57/32.png) [@machinesworking](https://forum.scalermusic.com/u/machinesworking)\
**Post date:** [February 7, 2025, 7:31am UTC](https://forum.scalermusic.com/t/does-scaler-3-let-you-set-the-key-of-the-scale-youre-searching-for/18842/3 "2025-02-07T07:31:54Z")

</div>

I get whats happening, I know the tonic of the scale, so when I hit detect I’m trying to find scales that match without having to search through the scales for the F tonic scales for example. Opening Scaler 2 right now and adding in the three chord start of a song spits out over 100 scales, and as it’s all going to be partial matches it takes much longer scrolling through all the scales to find the ones with the F tonic. So again, this is what I was asking, because to me this is the main reason I use Scaler at all, and it wouldn’t help me to upgrade if Scaler 3 also cannot sort the lists by tonic, just a similarity search.

---

<div class="post-metadata">

**Author:** ![davide](https://yyz2.discourse-cdn.com/flex012/user_avatar/forum.scalermusic.com/davide/32/824_2.png) [@davide](https://forum.scalermusic.com/u/davide)\
**Post date:** [February 7, 2025, 9:35am UTC](https://forum.scalermusic.com/t/does-scaler-3-let-you-set-the-key-of-the-scale-youre-searching-for/18842/4 "2025-02-07T09:35:38Z")

</div>

Het @machinesworking Have you seen this?

[![](https://canada1.discourse-cdn.com/flex012/uploads/scalermusic/original/2X/e/e9981c8aa68e2bcee991dfe38af1cc5f0310edd4.jpeg "Scaler 3 Prerelease Reveal 1 : Browse") ](https://www.youtube.com/watch?v=0dvmQ1AUwWY&t=50)

---

<div class="post-metadata">

**Author:** ![machinesworking](https://avatars.discourse-cdn.com/v4/letter/m/a88e57/32.png) [@machinesworking](https://forum.scalermusic.com/u/machinesworking)\
**Post date:** [February 8, 2025, 7:26am UTC](https://forum.scalermusic.com/t/does-scaler-3-let-you-set-the-key-of-the-scale-youre-searching-for/18842/5 "2025-02-08T07:26:31Z")

</div>

Hi Davide, it almost looks like he was able to choose the tonic, but he’s certainly not commenting on it, one note is darker as if it’s the tonic note and he only chooses three notes. I’m getting the impression it’s going to be a wait and see thing? I find this an interesting miss on the part of Scaler, I don’t think I’m alone in that I have basic theory, but nothing deep, write in odd scales that I then need to define to maybe push in a direction etc, and almost always know the root note of the scale, just not the name and chords of a scale.

---

<div class="post-metadata">

**Author:** ![machinesworking](https://avatars.discourse-cdn.com/v4/letter/m/a88e57/32.png) [@machinesworking](https://forum.scalermusic.com/u/machinesworking)\
**Post date:** [February 12, 2025, 6:17pm UTC](https://forum.scalermusic.com/t/does-scaler-3-let-you-set-the-key-of-the-scale-youre-searching-for/18842/6 "2025-02-12T18:17:44Z")

</div>

OK I went ahead and submitted a support ticket, I would be pretty disappointed in the beta testers if this wasn’t discussed as 3 gets VST hosting etc.

---

<div class="post-metadata">

**Author:** ![davide](https://yyz2.discourse-cdn.com/flex012/user_avatar/forum.scalermusic.com/davide/32/824_2.png) [@davide](https://forum.scalermusic.com/u/davide)\
**Post date:** [February 12, 2025, 7:59pm UTC](https://forum.scalermusic.com/t/does-scaler-3-let-you-set-the-key-of-the-scale-youre-searching-for/18842/7 "2025-02-12T19:59:01Z")

</div>

You can choose the tonic and filter by it and even add notes to see which scales contain. Is this what you mean?  
 ![Feb-13-2025 06-57-12](https://canada1.discourse-cdn.com/flex012/uploads/scalermusic/original/2X/e/e6cdcb01f074c7ab483ffe1c65256d0a45262e99.gif)

---

<div class="post-metadata">

**Author:** ![machinesworking](https://avatars.discourse-cdn.com/v4/letter/m/a88e57/32.png) [@machinesworking](https://forum.scalermusic.com/u/machinesworking)\
**Post date:** [February 13, 2025, 12:04am UTC](https://forum.scalermusic.com/t/does-scaler-3-let-you-set-the-key-of-the-scale-youre-searching-for/18842/8 "2025-02-13T00:04:09Z")

</div>

Yes, more or less, I would like to play in, add or drop a MIDI file in, with a scale that I do not know the mode of but I’m aware of what the tonic is. To me this is the major reason I even use Sclaler, to get chords for a scale I’m trying to define. In version 2 the list can be a PITA to navigate if you know the tonic, it’s not any better than online scale finders.

So it looks like you can at least add in notes and get it to recognize the tonic in Scaler 3, this makes any upgrade price worth it to me, thanks.
