# Crash issue when selecting Replace Existing

**URL:** <https://forum.scalermusic.com/t/crash-issue-when-selecting-replace-existing/13032>\
**Category:** Scaler 2 Support\
**Tags:** StudioOne\
**Created:** [February 13, 2023, 2:54am UTC](https://forum.scalermusic.com/t/crash-issue-when-selecting-replace-existing/13032 "2023-02-13T02:54:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![XyenzFyxion](https://avatars.discourse-cdn.com/v4/letter/x/7cd45c/32.png) [@XyenzFyxion](https://forum.scalermusic.com/u/XyenzFyxion)\
**Post date:** [February 13, 2023, 2:54am UTC](https://forum.scalermusic.com/t/crash-issue-when-selecting-replace-existing/13032/1 "2023-02-13T02:54:39Z")

</div>

Hi, and good day.

I ran into a crash issue while saving my chord sets. The reproducible issue is when I enter a title in the SAVE TO USER CONTENT pop-up, then I click REPLACE EXISTING. Studio One immediately crashes, every time.

MacOS 13.2 (happened in older versions, as well)  
Studio One 6.0.2 (happened in older versions, as well)

---

<div class="post-metadata">

**Author:** ![davide](https://yyz2.discourse-cdn.com/flex012/user_avatar/forum.scalermusic.com/davide/32/824_2.png) [@davide](https://forum.scalermusic.com/u/davide)\
**Post date:** [February 13, 2023, 8:02pm UTC](https://forum.scalermusic.com/t/crash-issue-when-selecting-replace-existing/13032/2 "2023-02-13T20:02:09Z")

</div>

Hi have you updated to 2.7.3? Please do so and let us know if the problem persists, I’m pretty sure that was rectified.